Linden Sweatshirt

Linden Sweatshirt by Grainline Studio

Linden Sweatshirt

The Linden Sweatshirt by Grainline is almost universally acknowledged as an easy beginner level pattern; a great introduction to sewing with Knits; a basic staple pattern; a really quick sew, a.k.a. a bit of a no-brainer. So it was rather a surprise to find that sewing the Linden gave me an unexpected opportunity to try out a couple of new things!

img_2391I debated about what View to make – both feature raglan sleeves, which I love; View A is your classic sweatshirt, oversized and full length whilst View B is a cropped affair with a high-low hem. I’d initially decided on View B but it’s a fact now cemented in my brain that boxy shapes just do not suit my short height somewhat big chested stature! A quick test version confirmed that I looked like this but, y’know, without the smile 😉

So I made up view B. I’m a D cup and, I kid you not, if I eat too many carbs or I’m hormonal, they can go up to E in the same day. Is that just me?! So I initially decided to play it safe and cut a size 14. I was using a gorgeous medium weight John Kaldor burgundy ‘Roanne’ viscose jersey from Minerva as it’s so soft but with some drape; I really wanted to avoid anything with more structure to negate the horror that is The Box.  I took my usual 1.5″ off the sleeve and 2″ off the bodice pieces.

img_9983And it was HUGE … yet I had to sew the neckband on twice because that, paradoxically, was too small. Thankfully I’d only basted it on so it wasn’t a big deal to rip it off and sew on a longer one. A quick Google search revealed I’m not the only one that has had this problem. The issue, I suspect, is down to the individuality of the knit fabric you’re using; it’s percentage and direction of greatest stretch. Which is why I decided to draft my own band pieces for my second version (see below). (This pattern requires at least 20% stretch – there’s a good post here on how to determine this).

However, once the neckband issue was resolved, I still love the top. Yeah it’s massively oversized and a slouchy batwing thing but, really, slouching around is what I do  best! I wore it a lot over Christmas when I barely got off the sofa.

Linden sweatshirt

So I  decided to sew it again (in the same fabric but in the French Navy colourway) only this time to do things differently. I went down two sizes and initially only cut out the bodice and sleeve pieces so I could calculate the length of my neck, cuff and hem bands later. I also decided to cut the bodice out on the single fold. I posted my reaction on doing this to my Instagram feed and it generated quite a few questions.

It was totally one of those moments where I smacked myself on the forehead *facepalm* style. Why had it taken me so long to try this!? I always trace my pattern pieces anyway so it didn’t take that much longer to trace an additional bodice piece, flip one of them over and then stick them together to create a whole. The centre join line becomes your new grainline and you can add top and bottom centre notches here (which come in useful when adding the bands later). [Edit: or see Kathleen’s alternative method in the Comments section below].

I found it took way less time to place the unfolded fabric on my cutting board (to ensure it was straight), and to pin and cut out this way. Fabrics with any drape and ‘shift’ (or pattern) I’ve always found relatively time consuming to fold; trying to ensure both layers are precisely aligned. I was also amazed at how much less fabric I used. As you may know, cutting on the fold, if you place the fabric selvage to selvage, can be wasteful (if you’re cutting on the fold and your fabric is wide enough, it’s better to fold with the selvages meeting in the middle I find). By placing my complete bodice pieces on the flat I was able to pin them side by side. One for the Win!

Once I’d sewn the bodice pieces and sleeves together, I then thought about how long the neckband should be to ensure it snapped to the body and laid flat. I found the easiest way to calculate this is to first measure the circumfrance of your neckline. I did this with a piece of string, pinning it in place at the starting point and marking the end point on the string itself…

How to measure calculate neckband length

…I then simply measured the piece of string to the marked point and multiplied this figure by 0.75 to get a measurement 25% less than the actual neckline (my fabric comfortably stretched to 25%, if your fabric has 20% stretch you’d multiply by .80 etc) and then added on the seam allowance to get the final measurement. (I also decided to increase the width of the neckband a tad). I drafted up my new neckband pattern piece according to these measurements and notched the quarter points. As directed in the pattern instructions, I then sewed the band together and attached it to the neckline matching the bodice (and sleeve) centre notches created earlier to evenly distribute it. Voila! For good measure, I topstitched it too.

Topstitching

For the cuffs I merely measured my wrist and added seam allowance and for the hem band I simply measured where the top would finish up around my hip and again added the S.A.

Linden Grainline neckband

Phew, who knew I’d have so much to say about such a simple top!?

I’m so glad that I now have the Linden in my arsenal; it really is another great staple pattern and, next time, it really will be a no-brainer I can sew up in next to no time! I’m wearing it here with another great everyday Grainline pattern; their Moss Skirt. (I’ve posted on that here and here).

Until next time, happy sewing!

Sew Sarah smith


Enter your email to subscribe to notifications from this site